Instruction Guide: Difference between revisions
Jump to navigation
Jump to search
Siddiq Toure (talk | contribs) mNo edit summary |
m (Formatting changes to make more readable and organized) |
||
Line 1: | Line 1: | ||
Materials Needed: | ==Materials Needed:== | ||
:# Electric Iron | |||
:# Plastic tube for cold water rinse | |||
:# Tables / Cutting space | |||
:# Printed black and with image/icon | |||
:# Cardboard box | |||
:# Tape (masking) | |||
:# Tub of iced water for cold soak fabric treatment | |||
:# Gal Bleach $20 | |||
:# Latex gloves $8.99 | |||
:# Large Roll (Freezer Paper) $9-30 | |||
:# Exacto Knives $8.99 x8 | |||
:# 20 oz mini spray bottles $5.29 x6 | |||
:# Fabric spray paint $8.99-$14.21 | |||
Manual Instruction: | ==Manual Instruction:== | ||
:# Cut two sturdy pieces of from a recycled cardboard box. | |||
:# Place artwork on top of one of the pieces of cardboard. | |||
:# Tap your artwork to the cardboard. | |||
:# Cut a piece of waxed paper to size. | |||
:# Place waxed sheet over artwork. | |||
:#* Waxed side down | |||
:#* Tape waxed sheet to cardboard. | |||
:# Use a pencil to completely outline you image. | |||
:#* Create an abstract outline of any detailed images | |||
:# After your image is fully outline, carefully cut around your stencil. | |||
:#* Do not cut completely around the entire stencil* | |||
:#* Do not remove your stencil from the wax sheet* | |||
:# Take the other piece of cardboard, and cut the edges so that they are rounded | |||
:# Place the second piece of cardboard under the surface of the fabric. | |||
:# This will act as a barrier between both sides of your garment. | |||
:#* Make sure to place cardboard is positioned, and clip down edges of fabric | |||
:#* Make sure cardboard size is appropriate for surfaces* | |||
:# Place wax paper with stencil on top the garment over the cardboard barrier. | |||
:# Carefully orient your wax paper stencil to the prefered position on you garment. | |||
:#* Make sure all other exposed areas of your garment are covered with wax paper to prevent unwanted splashes. | |||
paper to prevent unwanted splashes. | :# Remove cut portion of wax paper from your applied stencil sheet. | ||
:#* The surface of you garment should be visible through the cut outline* | |||
:# Iron wax paper stencil onto garment. | |||
:#* Wax paper will safely adhere most untextured cloth garment. | |||
:#* For non-cloth & solid material an alternative stencil material is necessary. | |||
:# Take mini spray bottles. | |||
:#* Fill one with pure bleach | |||
:#* Fill the other with ½-¼ bleach & add water to fill | |||
:#* Preferably distilled water for ironing | |||
:# Situate your work station for application. | |||
:#* Ready some paper towels for dabbing potential seepage | |||
:# Begin with a few sprays to cover entire design area. | |||
:#* A visible fade will appear as you are applying bleach | |||
:#* Do not allow liquid to seep through wax paper (dab as you go) | |||
:#* Apply full bleach solution or ½ solution till preferred shade or lightness | |||
:#* Darker colored garments may need more bleach than light colors | |||
:# Let surface sit for about 10 mins after applying pure bleach | |||
:#* Carefully peel away your wax paper stencil to remove it from the surface of the garment | |||
:#* stencil s may be reused if intacs after removal from garment. | |||
the garment* | :# Run garment under cold water for 1-2min to wash out excess bleach. | ||
:#* Do not leave garment bleaching longer than 10min | |||
:#* Bleach can eat through fabric | |||
:# Machine wash and dry. | |||
==Enjoy, your finished garment is ready to wear.== | |||
Revision as of 04:47, 26 September 2019
Materials Needed:
- Electric Iron
- Plastic tube for cold water rinse
- Tables / Cutting space
- Printed black and with image/icon
- Cardboard box
- Tape (masking)
- Tub of iced water for cold soak fabric treatment
- Gal Bleach $20
- Latex gloves $8.99
- Large Roll (Freezer Paper) $9-30
- Exacto Knives $8.99 x8
- 20 oz mini spray bottles $5.29 x6
- Fabric spray paint $8.99-$14.21
Manual Instruction:
- Cut two sturdy pieces of from a recycled cardboard box.
- Place artwork on top of one of the pieces of cardboard.
- Tap your artwork to the cardboard.
- Cut a piece of waxed paper to size.
- Place waxed sheet over artwork.
- Waxed side down
- Tape waxed sheet to cardboard.
- Use a pencil to completely outline you image.
- Create an abstract outline of any detailed images
- After your image is fully outline, carefully cut around your stencil.
- Do not cut completely around the entire stencil*
- Do not remove your stencil from the wax sheet*
- Take the other piece of cardboard, and cut the edges so that they are rounded
- Place the second piece of cardboard under the surface of the fabric.
- This will act as a barrier between both sides of your garment.
- Make sure to place cardboard is positioned, and clip down edges of fabric
- Make sure cardboard size is appropriate for surfaces*
- Place wax paper with stencil on top the garment over the cardboard barrier.
- Carefully orient your wax paper stencil to the prefered position on you garment.
- Make sure all other exposed areas of your garment are covered with wax paper to prevent unwanted splashes.
- Remove cut portion of wax paper from your applied stencil sheet.
- The surface of you garment should be visible through the cut outline*
- Iron wax paper stencil onto garment.
- Wax paper will safely adhere most untextured cloth garment.
- For non-cloth & solid material an alternative stencil material is necessary.
- Take mini spray bottles.
- Fill one with pure bleach
- Fill the other with ½-¼ bleach & add water to fill
- Preferably distilled water for ironing
- Situate your work station for application.
- Ready some paper towels for dabbing potential seepage
- Begin with a few sprays to cover entire design area.
- A visible fade will appear as you are applying bleach
- Do not allow liquid to seep through wax paper (dab as you go)
- Apply full bleach solution or ½ solution till preferred shade or lightness
- Darker colored garments may need more bleach than light colors
- Let surface sit for about 10 mins after applying pure bleach
- Carefully peel away your wax paper stencil to remove it from the surface of the garment
- stencil s may be reused if intacs after removal from garment.
- Run garment under cold water for 1-2min to wash out excess bleach.
- Do not leave garment bleaching longer than 10min
- Bleach can eat through fabric
- Machine wash and dry.