Gerber Sabre 408 CNC Router: Difference between revisions
Jump to navigation
Jump to search
(added T-slot profile) |
(added photo) |
||
Line 1: | Line 1: | ||
[[File:Gerber_Sabre_408_At_Make_Nashville.jpg|thumb]] | |||
== Overview == | == Overview == | ||
Revision as of 12:09, 10 June 2020
Overview
CNC router owned by Peter Schulert. It was bought in fully working condition, but the controls were modified to be run with LinuxCNC to support G-code rather than the proprietary Gerber files generated by ArtPath.
Specifications
Active Cutting Area | 53.5x101" (1350x1370 mm) |
---|---|
Overall Size | 69x123" (1750x3120 mm) |
Weight | 1575 lb (714.4 kg) |
Maximum Material Width | 59" (1500 mm) |
Maximum Material Thickness | 4.1" (104 mm) |
Z-Axis Travel | 7.5" (190 mm) |
X/Y/Z Feed Rate | 600 ipm (250 mm/sec) |
Rapid Rate | 1300 ipm (590 mm/sec) |
Repeatability | 0.000078" (0.0019 mm) [doubtful] |
Serial No. | 827,059 |
Vacuum table's T-slot profile:
Media:Gerber_Sabre_T-Slot_Diagram.pdf
Software
LinuxCNC
TODO
Online Resources
http://www.gspinc.com/downloads/PDF/fastfacts/literature/Sabre_Users_Manual.pdf
Gerber Sabre Series Router Pre-Installation Checklist
Gerber Sabre 404 and 408 Installation Instructions
Replacing a Sacrificial Table Surface on Sabre Series Routers
Sabre High Frequency Spindle User Manual
Speeds and Feeds for High Frequency Spindle
Router Electric Spindle Care and Maintenance