3D Systems ProJet 660Pro 3D Printer: Difference between revisions
Jump to navigation
Jump to search
(initial page creation) |
|||
Line 56: | Line 56: | ||
<pre>S/N 70365-157</pre> | <pre>S/N 70365-157</pre> | ||
The ribbon cable has a small indent in it, but it has been checked for continuity, and appears to have no problems with the relevant pins. | |||
== Online Resources == | == Online Resources == |
Revision as of 17:41, 9 July 2019
Overview
Color 3D printer that works by using inkjet nozzles to print dye/binder into a powder bed. Apparently 3D Systems acquired Z Corporation, and a 3D Systems ProJet 660 used to be a Z Corporation ZPrinter 650 (aka Z650?).
Specifications
Build Volume | 10x15x8" (254x381x203mm) |
---|---|
Resolution | 600x540 DPI |
Minimum Feature Size | 0.004" (0.1mm) |
Layer Thickness | 0.004" (0.1mm) |
Vertical Build Speed | 1.1"/hr (28mm/hr) |
Prototypes Per Build | 36 |
Printer Weight | 750lbs (340kg) |
Electrical | 100-240V, 15-7.5A |
Software
"3DPrint" and the newer "3D Sprint" software:
Software Downloads | ProJet CJP x60 (260, 360, 460)
Replacement Parts
Pogo Board Ribbon Cable
The ribbon cable has a sticker that reads:
S/N 70365-157
The ribbon cable has a small indent in it, but it has been checked for continuity, and appears to have no problems with the relevant pins.
Online Resources
User Guide | ProJet CJP x60 (260, 360, 460)
3D Systems ProJet x60 Series Brochure
3D Systems ProJet x60Pro Series User Guide Part Number 95052 Rev. B (5/05/17)
Z Corporation ZPrinter 650 Hardware Manual Part Number 09577 Rev. A (12/21/08)