K40 40W CO2 Laser Cutter: Difference between revisions

From Make Nashville Wiki
Jump to navigation Jump to search
(added OEM replacement laser power supply link)
(added CO2 laser tube information)
(One intermediate revision by the same user not shown)
Line 20: Line 20:


Generic Chinese "K40" laser cutter bought off eBay. It has been upgraded from the proprietary motherboard/firmware/software to an open source toolchain using a 3D printer Smoothieware compatible motherboard.
Generic Chinese "K40" laser cutter bought off eBay. It has been upgraded from the proprietary motherboard/firmware/software to an open source toolchain using a 3D printer Smoothieware compatible motherboard.
Here is the exact item that was bought on eBay:<br/>
[https://www.ebay.com/itm/172333949152 High Precise 40W Co2 USB Laser Engraving Cutting Machine Engraver 300x200mm | eBay]


== Software ==
== Software ==
Line 122: Line 125:


[[File:LightObject_LSR-CBLKIT_Stock_Photo.jpg|64x64px]] [https://www.lightobject.com/Laser-Power-Supply-Cable-Repair-Kit-P974.aspx $9.50 -- Laser Power Supply Cable Repair Kit | LightObject]
[[File:LightObject_LSR-CBLKIT_Stock_Photo.jpg|64x64px]] [https://www.lightobject.com/Laser-Power-Supply-Cable-Repair-Kit-P974.aspx $9.50 -- Laser Power Supply Cable Repair Kit | LightObject]
=== Laser Tube ===
"KH Laser" 40W CO2 laser tube photos:
<gallery>
File:K40_KH_Laser_Tube_Certificate_of_Conformity_Label_Top.jpg|Certificate of Conformity (top)
File:K40_KH_Laser_Tube_Certificate_of_Conformity_Label_Bottom.jpg|Certificate of Conformity (bottom)
File:K40_KH_Laser_Tube_QR_Code_Closeup.jpg|QR code
File:K40_KH_Laser_Tube_Damage_Closeup_1.jpg|water contamination in CO2 gas portion of glassware (1/2)
File:K40_KH_Laser_Tube_Damage_Closeup_2.jpg|water contamination in CO2 gas portion of glassware (2/2)
</gallery>

Revision as of 15:50, 14 December 2018

Generic "K40" laser cutter stock photo
Make Nashville's upgraded K40
working area of the laser
upgraded interface panel closeup
upgraded interface panel wiring
MKS SBASE V1.1 mounted and wired
MKS SBASE V1.1 pinout diagram
MKS SBASE V1.1 outline and hole pattern diagram
MKS SBASE V1.3 outline, plug, and hole pattern diagram

Overview

Generic Chinese "K40" laser cutter bought off eBay. It has been upgraded from the proprietary motherboard/firmware/software to an open source toolchain using a 3D printer Smoothieware compatible motherboard.

Here is the exact item that was bought on eBay:
High Precise 40W Co2 USB Laser Engraving Cutting Machine Engraver 300x200mm | eBay

Software

LaserWeb

TODO add description and possiblly a page for a tutorial

LaserWeb/LaserWeb4: Collaborative effort on the next version of LaserWeb / CNCWeb | GitHub

Inkscape Plugin

Forest Darling wrote an Inkscape plugin that allows SVG files to be exported to G-code that can drive the laser cutter. It uses specially named "layers" in Inkscape to determine how the vectors will be engraved or images will be rastered.

Firmware

We use the standard stable Smoothieware "firmware.bin" available here:

https://github.com/Smoothieware/Smoothieware/tree/edge/FirmwareBin

Instructions on how to flash the firmware:

http://smoothieware.org/getting-smoothie

http://smoothieware.org/flashing-smoothie-firmware

Upgrades

Smoothieboard

Actually an MKS SBASE which is a Smoothieware firmware compatible Smoothieboard clone:

older MKS SBASE V1.1 that was donated and installed in the K40

$60.99 -- KINGPRINT NEW Smoothieware Controller Board MKS SBASE V1.3 32bit Controller Panel Board for 3D Printer

MKS SBASE V1.1/V1.2 documentation by pixel3design-hub on GitHub

MKS SBASE V1.0-??? documentation by makerbase-mks on GitHub

NOTE: post says there is no documentation yet for V1.3, I don't think it's very different from a user standpoint though:
MKS-SBASE v1.3 Schematic · Issue #39 · makerbase-mks/MKS-SBASE | GitHub

Low Voltage Power Supplies

Dedicated power supplies (not piggy-backing off the laser high voltage power supply):

$17.31 -- Delta Electronics PMT-24V50W1AA

$15.45 -- Delta Electronics PMC-05V015W1AA

For wiring the 5V power supply to the Raspberry Pi's Micro-USB port:

$1.95 -- Adafruit Industries LLC 2727

$1.02 -- MPD (Memory Protection Devices) EP502A

Additional Power Outlets

$7.48 -- uxcell 5 Pcs AC 125 15A Power Connector 3 Terminals to US 3 Pin Socket

Air Assist

$21.50 -- 18mm Laser Head w/ Air Assisted. Ideal for K40 Machine

$29.99 -- TEN-HIGH Diam 18mm ZnSe Focal Lens for CO2 Laser Cutting, Focal Length of 2"/50.8mm

$10.50 -- 5X8 Silicon Flex Tube for Air Assistance or Water Cooling(10ft)

$46.61 -- Active Aqua Commercial Air Pump, 8 Outlets, 60W, 70 L/min

Water Pump

The included water pump is noisy and pathetic, and a replacement is very inexpensive:

$23.95 -- EcoPlus 728310 Eco 396 Fixed Flow Submersible/Inline Pump 396 GPH

$3.12 -- Banjo HB050-025 Polypropylene Hose Fitting, Adapter, 1/2" NPT Male x 1/4" Barbed

Ventilation

NOTE: This has not been tested! This is a proposed attachment that allows the use of an in-line pump:
$5.99 -- POWERTEC 70150 Rectangular Dust Hood for 4-Inch Hose

Replacement Parts

Laser Power Supply


$65.54 -- 40W Power Supply for CO2 Laser Tubes Engraver Cutter Machine AC 110V

A higher quality alternative (with a different pinout) from a reputable US seller (still made in China):

$205.00 -- 20W~45W PWM CO2 Laser Power Supply (AC110V) | LightObject

High Voltage Cable

$9.50 -- Laser Power Supply Cable Repair Kit | LightObject

Laser Tube

"KH Laser" 40W CO2 laser tube photos: