Fadal VMC20 CNC Mill: Difference between revisions
Jump to navigation
Jump to search
(→Online Resources: Added manuals link. Noted that the 2016 is the closest match to the 20 (updated version of the machine).) |
(→Online Resources: Added link to serial communications document and summary of what it's looking for.) |
||
Line 72: | Line 72: | ||
* [https://www.fadalcnc.com/technical-documentation Manufacturer documentation]. | * [https://www.fadalcnc.com/technical-documentation Manufacturer documentation]. | ||
* [https://www.fadalcnc.com/tech-docs Manuals]. The "2016" is the closest match (the updated version of this machine). | * [https://www.fadalcnc.com/tech-docs Manuals]. The "2016" is the closest match (the updated version of this machine). | ||
* [https://www.fadalcnc.com/media/pdf/Setting_up_RS232_Communication.pdf How to set up serial communications.] It wants 7e1, xon/xoff flow control, and the file must start and end with a % sign. |
Revision as of 13:23, 31 July 2020
Overview
Vertical machining center donated to Make Nashville by Jeremy Todd of United Machine & Tool. It is an older machine built in 1993, and features brushed DC servos rather than modern 3-phase brushless servos, however the technology is still robust!
Specifications
Model | 904-20 |
---|---|
Serial | 9103079 |
Voltage | 230VAC |
Phase | 3 |
Frequency | 60Hz |
Full Load Amps | 25A |
Replacement Parts
Servo Motor Cables
TODO
Servo Amplifiers
Brushed DC servo amplifiers made by Glentek. The nameplate reads:
Glentek El Segundo, CA. Model: GA4568-4E-1 Serial: 3090 HF 3Ø
Documentation is still available:
GA4567EPC / GA4568EPB Operation and Service Manual
From Glentek's website:
Relay Board
The board has marked on it's silkscreen:
1100-1B Fadal PF-B94V-0
1100-1B RELAY DISTRIBUTION BOARD | FadalCNC.com
The board seems to have 7 solid state relays, two bypassed outputs (no isolation), and two mechanical relay outputs.
Online Resources
- Manufacturer's web site.
- Manufacturer documentation.
- Manuals. The "2016" is the closest match (the updated version of this machine).
- How to set up serial communications. It wants 7e1, xon/xoff flow control, and the file must start and end with a % sign.