CubePro Hacking Project

The CubePro manual gives very little information to consumers on how to maintain the machine.

Warning: The machine and its components are often very fragile. The methods given in this guide will void your warranty, hack/modify at your own risk.

Cleaning the nozzles

The nozzle threads into the heat-brake above the heating element. Unfortunately, you cannot remove the nozzle directly from the heating element.

Replacing the nozzles with non-standard parts

The heat-brake uses internal M6 threading. To replace the nozzle and heating element, your part must have external M6 threads (same type used on the V6 nozzle).

Replacing the PTFE liner

TODO