File:End-mill-mmc-ball-carbide.png

From Make Nashville Wiki
Revision as of 19:43, 3 November 2019 by Christopher Thomas (talk | contribs) (Typical ball end mill from McMaster-Carr. This one will work with the small CNC router (1/4" shank, 1/4" cutting diameter).)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

End-mill-mmc-ball-carbide.png ‎(633 × 424 pixels, file size: 66 KB, MIME type: image/png)

Summary

Typical ball end mill from McMaster-Carr. This one will work with the small CNC router (1/4" shank, 1/4" cutting diameter).

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:43, 3 November 2019Thumbnail for version as of 19:43, 3 November 2019633 × 424 (66 KB)Christopher Thomas (talk | contribs)Typical ball end mill from McMaster-Carr. This one will work with the small CNC router (1/4" shank, 1/4" cutting diameter).

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://mediawiki.makenashville.org/index.php?title=File:End-mill-mmc-ball-carbide.png&oldid=8967"