Fadal VMC20 CNC Mill: Difference between revisions
(added more ballscrew photos) |
m (updated formatting heirarchy) |
||
Line 47: | Line 47: | ||
==== X axis ==== | ==== X axis ==== | ||
==== Ballscrew ==== | ===== Ballscrew ===== | ||
[[File:Fadal_VMC20_X_Axis_Ballscrew_Removed.jpg|thumb|none|X axis ballscrew/bearing block assembly]] | [[File:Fadal_VMC20_X_Axis_Ballscrew_Removed.jpg|thumb|none|X axis ballscrew/bearing block assembly]] | ||
Line 64: | Line 64: | ||
* marked "9 M Y" and "18" on the floating end. | * marked "9 M Y" and "18" on the floating end. | ||
==== Ballnut ==== | ===== Ballnut ===== | ||
<gallery> | <gallery> | ||
Line 77: | Line 77: | ||
* 37mm ID bore for wiper, ~5.6mm deep. | * 37mm ID bore for wiper, ~5.6mm deep. | ||
==== Angular contact bearing block ==== | ===== Angular contact bearing block ===== | ||
<gallery> | <gallery> | ||
Line 103: | Line 103: | ||
* made out of smooth black anodized aluminum | * made out of smooth black anodized aluminum | ||
==== Angular contact bearings ==== | ===== Angular contact bearings ===== | ||
[[File:Fadal_VMC20_X_Axis_Angular_Contact_Bearing.jpg|thumb|none|NSK 7304B angular contact bearing]] | [[File:Fadal_VMC20_X_Axis_Angular_Contact_Bearing.jpg|thumb|none|NSK 7304B angular contact bearing]] | ||
Line 117: | Line 117: | ||
Apparently 1.125" shaft diameter, 1.756" OD, 0.250" thick. | Apparently 1.125" shaft diameter, 1.756" OD, 0.250" thick. | ||
==== Locknut ==== | ===== Locknut ===== | ||
<gallery> | <gallery> | ||
Line 132: | Line 132: | ||
[https://itscnc.com/ballscrews-assy-parts/nut-retainer-bls-tail-mm-screws.html Buy Fadal Ballscrew Retainer Metric Screws, BLS-0049| ITSCNC.com] | [https://itscnc.com/ballscrews-assy-parts/nut-retainer-bls-tail-mm-screws.html Buy Fadal Ballscrew Retainer Metric Screws, BLS-0049| ITSCNC.com] | ||
==== Woodruff key ==== | ===== Woodruff key ===== | ||
<nowiki>#</nowiki>61 Woodruff, 3/16" x 5/8" | <nowiki>#</nowiki>61 Woodruff, 3/16" x 5/8" |
Latest revision as of 20:47, 20 May 2022
Overview
Vertical machining center donated to Make Nashville by Jeremy Todd of United Machine & Tool. It is an older machine built in 1993, and features brushed DC servos rather than modern 3-phase brushless servos, however the technology is still robust!
Specifications
Model | 904-20 |
---|---|
Serial | 9103079 |
Voltage | 230VAC |
Phase | 3 |
Frequency | 60Hz |
Full Load Amps | 25A |
Replacement Parts
Automatic Tool Changer
- #10-32x1/2" socket head caps screws with split washers secure the dog keys near the forks under the ATC carousel. 5/32" hex key required.
- 1/8"x1/2" roll pins for holding the steel forks into the ATC carousel.
- 3.34" OD 2.55" ID 0.056" thick plastic washers as bushings for the umbrella slide open door.
- 5/16-18x2-5/8" socket head caps crews for securing the geneva wheel to the ATC shaft drum.
- 3/8-16x1-1/2" hex head bolts for securing the aluminum bottom cap to the ATC shaft drum. 9/16" wrench/socket required.
- 14pcs ~2" OD ~1.0" ID spring washers both above and below the ATC shaft bearings.
- 1.54" OD 1" ID needle roller thrust bearings, 0.138" thick overall, partially due to 2pcs 0.030" thick washers.
Ballscrews
X axis
Ballscrew
- 32mm OD ballscrew, 0.2" lead, 1/8" balls.
- 25-5/8" ballscrew journal length
- ~1-1/16" or ~27mm diameter shoulder, 9.5mm or 0.375" long.
- 20mm diameter shaft for angular contact bearings, 29.2mm long (for pair of 15mm thick bearings)
- 3mm thread relief, 16.5mm diameter.
- 3/4"-16 threads, 16mm long including the 3mm relief (13mm of actual threads).
- 0.625" diameter shaft for lovejoy coupler, 25.2mm long. It has a 3/16" thick Woodruff key cutout.
- marked "9 M Y" and "18" on the floating end.
Ballnut
- 70.6mm OD flange, 12.7mm (1/2") thick.
- 5x 0.336" (8.5mm) clearance holes in a 2-5/16" diameter hex hole pattern (missing the hole that would interfere with the ball returns).
- 43.3mm OD cylindrical body.
- 37mm ID bore for wiper, ~5.6mm deep.
Angular contact bearing block
-
bearing block/servo mounting block to casting area (photo 1)
-
bearing block/servo mounting block to casting area (photo 2)
-
ballscrew side (oil seal removed)
-
lovejoy/motor side (retainer cap removed)
-
bearing retaining cap (inward side)
-
bearing retaining cap (outward side)
-
servo motor mount
Square bearing block:
- 1.75" diameter 0.25" deep lip for retaining angular contact bearing, and for the spring lip oil seal.
- 0.98" or 24.9mm thick block out of smooth black anodized aluminum.
Retaining cap:
- 15mm thick, ~2.98" or ~76.7mm OD
- ~52mm ID for press fitting angular contact bearing
- 1.75" ID ~3/16" or ~4.75mm thick lip to keep bearing from coming out of front face, as well as for press fitting the spring lip oil seal.
- 4x ~0.325" diameter 5/16" bolt clearance holes in a 2.5" diameter bolt hole pattern.
- held on by 4pcs 5/16"-18x1-1/4" hex bolts (1/2" wrench) and split lock washers.
- made out of smooth black anodized aluminum
Angular contact bearings
NSK 7304B G JAPAN
52mm OD, 20mm ID, 15mm thick
Oil seal:
NATIONAL 471692 USA
Apparently 1.125" shaft diameter, 1.756" OD, 0.250" thick.
Locknut
3/4"-16 threads, 28mm (?) wrench, 15mm thick, 26.9mm diameter, 9.3mm turned down region.
It is probably one of the following parts:
Buy Fadal Ballscrew Retainer Nut Small, BLS-0047 | ITSCNC.com
Buy Fadal Ballscrew Retainer Metric Screws, BLS-0049| ITSCNC.com
Woodruff key
#61 Woodruff, 3/16" x 5/8"
HDW-0382 - Genuine Fadal Hardware
Buy Fadal Woodruff Key #61 3/16" X 5/8", HDW-0382 | ITSCNC
Compatible replacements on McMaster-Carr:
Woodruff Key, 1018-1045 Carbon Steel, Key Number 61, 3/16" Wide | McMaster-Carr
High-Profile Woodruff Key, 1018-1045 Carbon Steel, Key Number 61, 3/16" Wide | McMaster-Carr
Servo Motors
DC Motors
X axis:
Baldor DC Servomotor | ||
---|---|---|
CAT No | ITS731D002M8 | |
Spec No. | 55P551Z119G1 | |
Mfg No. | B1012060066 | |
Torque, Stall | 38 LI Cont. | |
Max. Speed | 3500 RPM | |
Max. Voltage | 180 VDC | |
Voltage Const. | KE = 36 V/kRPM | |
Current Cont. | 15.1 A | |
Current, Peak | 65 A | |
Insulation | Class F 25°C Amb. | |
Fort Smith, AR 72902 Made in U.S.A. |
Mounted using 4pcs 3/8" bolts, 9/16" wrench size, 1/2" long threads. There are also split lock washers.
Resolvers
Either a Advanced Micro Controls R11W-F10/7:
R11 Size 11 Brushless Resolvers
Advanced Micro Controls R11W-F10/7 Specification Sheet (Sheet # 940-2T440)
Or an API Harosyn 11BRW-300-F 1/6
Size 11/R11 Heavy Duty Brushless Resolvers | Dynapar
OEM parts:
Resolvers | Product Education | FadalCNC.com
PCB
Seems to be a Glentek GM4000-1058 board with the following over-temperature sensor:
Servo Motor Cables
The original X axis servo cable was a 1/2" watertight conduit containing smaller cables:
- braid shielded 2 conductor 14 AWG (105 strands) pretinned, internal jacket colors are red/black with gray outer jacket, ~0.325" jacket diameter
- green/yellow striped 14 AWG (41 strands) pretinned ground wire
- 0.1" outer jacket diameter, ~0.55" inner jacket diameter, 26 AWG or 25 AWG (7 strands) pretinned, braid shielded coaxial cable
- foil shielded (w/ drain wire) 4 conductor 22 AWG (7 strands) pretinned, internal jacket colors are red/black/white/green with gray outer jacket, 0.157" jacket diameter
- foil shielded (w/ drain wire) 2 conductor 22 AWG (7 strands) pretinned, internal jacket colors are red/black with gray outer jacket, ~0.130" jacket diameter
WIR-0090 | NXGEN Fadal Machine Parts
The cable has some coaxial "bullet" connectors:
TE 201143-1 (need to verify)
Which connect to the 1010 cards in the control cabinet
TE 50107-1 (need to verify)
wrong axis controller board on fadal machine?
Fadal 4th axis, plugged it in and the machine went down
The cable has contacts that need to be loaded into the following connector that goes into the backplane PCB near the bottom of the cabinet:
Which requires one of the following tools to extract the 0.093" (2.36mm) pins:
Molex 0011030006 (unsure)
It also has this connector for the resolver board inside the servo feedback area:
Servo Amplifiers
Brushed DC servo amplifiers made by Glentek. The nameplate reads:
Glentek El Segundo, CA. Model: GA4568-4E-1 Serial: 3090 HF 3Ø
Documentation is still available:
GA4567EPC / GA4568EPB Operation and Service Manual
From Glentek's website:
Relay Board
The board has marked on it's silkscreen:
1100-1B Fadal PF-B94V-0
1100-1B RELAY DISTRIBUTION BOARD | FadalCNC.com
The board seems to have 7 solid state relays, two bypassed outputs (no isolation), and two mechanical relay outputs.
CPU Board
Fadal 1400-2A
Software Module
Fadal VMC V91.1A-2 2091
Online Resources
- Manufacturer's web site.
- Manufacturer documentation.
- Manuals. The "2016" is the closest match (the updated version of this machine).
- How to set up serial communications. It wants 7e1, xon/xoff flow control, and the file must start and end with a % sign.